NOVAsom M7 Hardware User Manual

From Novasomindustries Wiki
Jump to: navigation, search

Download this user manual in pdf here:
File:N.M7-250518-HUM-M7-V1.4.pdf

M7front.png

Welcome to the NOVAsom M7 world

Thank you for choosing this NOVAsom Industries product.
Please carefully read this user guide before using the device for the first time to ensure safe and proper use.
In particular note that:

  • Contents and illustrations may differ from your device, depending on the software version, OS version or product improvements that NOVAsom Industries judges important, and are subject to change without prior notice. Always stay updated visiting www.novasomindustries.com.
  • Descriptions are based on the device default settings.
  • Modifying the device, the device’s operating system or installing software from unofficial sources may damage the device itself and lead to data corruption or data loss, or worst, hardware damage. Such actions will violate your NOVAsom Industries license agreement and void your warranty.
  • Always use genuine NOVAsom Industries accessories. The supplied items are designed only for this device and may not be compatible with other devices. To have further information on this specific item visit www.novasomindustries.com.
  • Default applications on the device are subject to updates, and support for these applications may be withdrawn without prior notice. If you have any questions about an application provided with the device, please contact NOVAsom Industries at www.novasomindustries.com.
  • Software, audio, wallpaper, images, and other media supplied with your device or found in the appropriate SDK are licensed for limited use. If you extract and use these materials for commercial or other purposes, you may be infringing copyright laws. As a user, you are fully responsible for the illegal use of media.

The NOVAsom M7 family is a product line from NOVAsom Industries, targeted toward the low price market (vending, domotics, IoT, etc.) and designed to compete with low cost boards while maintaining NOVAsom Industries high quality level.

NOVAsom M7 is a very small NOVAsom board, approximately credit card size, but with all the necessary to guarantee an immediate bootstrap, driving a display, connecting via Ethernet and USB. It’s equipped with one 2.54 mm. dual row strip PI compatible for external expansions.

One product with different configurations is available:

  • NOVAsomM7A: with Rockchip® RK3328 quad A53 processor @1.6GHz, 1GB RAM DDR3L, 5V power supply
  • NOVAsomM7B: with Rockchip® RK3328 quad A53 processor @1.6GHz, 1GB RAM DDR3L, 5V power supply, Wi-Fi/BT
  • NOVAsomM7C: with Rockchip® RK3328 quad A53 processor @1.6GHz, 1GB RAM DDR3L, 12V (6.5 - 18Vcc protected) power supply, Wi-Fi/BT
  • NOVAsomM7D: with Rockchip® RK3328 quad A53 processor @1.6GHz, 2GB RAM DDR3L, 12V (6.5 - 18Vcc protected) power supply, Wi-Fi/BT
  • NOVAsomM7FT: with Rockchip® RK3328 quad A53 processor @1.6GHz, 2GB RAM DDR3L, 16GB EMMC, 12V (6.5 - 18Vcc protected) power supply, Wi-Fi/BT

This will vary with time, more information about product status and availability can be found visiting www.novasomindustries.com.

Features

From the integrator point of view the board is a full-fledged SBC, with video and communications capabilities and requires a single supply from a wall cube or a generic external power supply.
The main characteristics of the NOVAsom M7 are:

  • On Board Peripherals:
    • Up to 2GBytes 32 bit wide LPDDR
    • Up to 256GBytes 32 bit eMMC
    • 1 bootable µSD slot up to 128GBytes
    • 1 Ethernet port @ 10/100 Mbit/sec.
    • 1 4K HDMI video output port
    • 1 Integrated RTC with optional external battery connector
    • Audio codec and analog RGB output on dedicated expansion connector J7
    • 1 USB 2.0 Host connector + 1 USB 2.0 OTG connector
    • 1 USB 3.0 Host connector
    • 1 Remote IR input with connector
    • 1 optical SPDIF out expansion connector
    • 1 Power led and 1 User Driven led
    • Wi-Fi/Bluetooth module with UFL antenna connector
  • On Expansion Connectors (J9):
    • 1 I2C @ 3.3V
    • 1 SPI @ 50 MHz maximum
    • 8 GPIO @ 3.3V
    • 1 Full UART @ 3.3V (TX; RX; RTS; CTS)
    • 1 PCM AUDIO @ 3.3V
    • 1 x µSD/eMMC plus 3 GPIO
    • 1 x TX/RX only UART
  • On IR Expansion Connectors (J4):
    • Input from IR detector (Note 1)(Note 2)
    • Output led for IR feedback (Note 1)(Note 2)
  • On SPDIF Expansion Connectors (J5):
    • Output led for optical SPDIT transmitter (Note 1)(Note 2)

Note 1: these pins have a dedicated function and cannot be used as GPIO
Note 2: these pins have the appropriate driver
All the pins without (Note 1), (Note 2) or (Note 3) can be programmed as GPIO or programmed accordingly to the functions described in table 6 and table 7 below.
The connector J4 is normally not equipped with the pin strip.
The user has so the choice to use a male or female contact type, and to solder the strips on top or bottom of the NOVAsom M7, use partially populated connectors or a mix of them.

Description

The NOVAsom M7 family is equipped with Rockchip RK3328 quad A53 processor, up to 2GByte DDR3L, 256GB EMMC and Wi-Fi/BT, 100 Mbps Ethernet with magnetic connector on board and PI compatible expansion connector. UPS-Manager©, Wi-Fi and other options are available on request.

Visit www.novasomindustries.com, you can download 3D drawings and detailed mechanical drawing.

Note: the signal names have been maintained the same as in the CPU manual.

Having different GPIOs with different functions, only the functions implemented at DTB kernel level have been reported below. If you need to combine different functions with the GPIOs this will be possible after modification of the DTB kernel.

More information on the various possible combinations can be found in the CPU manual.

Board Layout, Connectors description and Configuration

Board Layout

In Figure 1 you can see the NOVAsom M7 board TOP General Layout, in Figure 2 you can see the NOVAsom M7 board BOTTOM general Layout.

M7fview.png

Figure 1: NOVAsom M7 top view

M7bview.png

Figure 2: NOVAsom M7 bottom view

Connectors list and function

In Figure 3 you can see the NOVAsom M7 board connectors top placement, while in Figure 4 you can see the NOVAsom M7 board connectors bottom placement.

M7ct.png

Figure 3: NOVAsom M7 top view connectors

M7cb.png

Figure 4: NOVAsom M7 bottom view connectors

Connectors pinout

In Table 1 you can see the NOVAsom M7 board connectors and the mating connectors.
The connectors marked with “-“ are for internal use only.

Connector Manufacturer Connector Part Number Function
J1 Molex 1051620001 µSD
J2 FCI 10104111-0001LF µUSB
J3 Molex 484040003 USB 3.0
J4 JST BM04B-SRSS-TB(LF)(SN) IR
J5 Molex 53398-0371 SPDIF
J6 FCI 10029449-001RLF HDMI
J7 Molex 53398-0671 A/V PORT
J8 Abracon ARJE-0032 Eth+USB 2.0
J9 - - 40 pin header
J10 Hirose U.FL-R-SMT-1 UFL connector
J11 CUI PJ-002AH-SMT-TR POWER
J12 Molex 53398-0271 Battery

Table 1: Connectors list

In the Table 2 you can see the NOVAsom M7 board connectors functions and pin assignment for the non-standard parts.

Identifier Function Position Pin Function
J1 SD Card Slot Top Standard µSD card
J2 USB2.0 OTG Bottom Standard USB
J3 USB3.0 HOST Top Standard USB 3.0
J4 IR CONNECTOR TOP 1: LED
2: GND
3: IR_RX
4: 3.3 VCC
J5 SPDIF TOP 1: SPDIF OUT
2: 3.3 VCC
3: GND
J6 HDMI BOTTOM Standard HDMI
J7 A/V PORT TOP 1: 3.3 VCC
2: TV Out
3: LINEOUT L
4: LINEOUT R
5: AUDIO MUTE
J8 ETH/USB TOP Standard Ethernet
Standard USB 2.0
J9 EXPANSION TOP
J10 WiFi / BT TOP Standard center pin UFL connector
J11 Power In TOP Standard 2x5.5MM center positive connector
J12 External Battery TOP 53261 pico blade
1: Positive
2: Negative

Table 2: Connectors pinout

(*) Note: the µSD slot is 3.3V powered and has no provisions to manage the insertion or the removal of the µSD card with power applied, and thus no ESD protections equip the µSD slot. The insertion or the removal of a µSD card with applied power may result in a permanent damage to the card or, worst, to the NOVAsom M7 board. The card MUST be inserted without power applied. The presence switch that equips the µSD slot of the NOVAsom M7 board signals to the processor that a card is in the slot, thus allowing the boot process to read the bootloader from the µSD slot. If the card is not found when the power is applied the boot process will look in eMMC chip for a valid bootloader code but the presence of the eMMC depends on the NOVAsom M7 board equipment. The µSD slot is a push only operated slot. Removing the µSD card without pushing will result in mechanical failure of the slot itself.

J9 Expansion Connector pinout

J9details.png

Figure 5: J9 Details

J9pinout.png

Table 3: J9 Connectors pinout




J7 Audio Connector pinout

M7J7pinout.png


Figure 6: Audio connector detail, default OMTP

Power Input

M7PwImp.png

Figure 7: Power input section

Electrical characteristics

Absolute maximum ratings

Over operating free-air temperature range (unless otherwise noted)(1)(2)

VINHIGH 6.5 to 13V (up to 18Vcc for t < 100 uSec. )
3.3V pin input voltage (2) -0.3V to 3.6V
Battery Voltage Input -0.3V to 4.7V
3.3V pin output voltage (2) -0.3V to 3.6V
Input clamp current for 3.3V pin (2) ±10mA

Table 4: Absolute maximum ratings

1. Stresses beyond those listed under “Absolute maximum ratings” may cause permanent damage to the board. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect board reliability.
2. (2)The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

Recommended operating conditions

VINHIGH 6.5V to 12.5 Vcc (up to 18Vcc for t < 100 uSec.)
3.3V pin input voltage (2) 0V to 3.3V
Battery Voltage Input 0V to 4.3V
3.3V pin output voltage (2) 0V to 3.3V
Input clamp current for 3.3V pin (2) ±2mA

Table 5: Recommended operating conditions

Power consumption and power dissipation

All measurements are done with an input voltage of 12V with Android 8.1 and an HDMI monitor @ 1920x1080.

  • Boot phase: 200 mA
  • Running: 170 mA Suspend to memory: 110 mA
  • Freeze to memory: 20 mA

For the details of the low power modes consult the Rockchip RK3328 Reference Manual

USB relevant standards

  • Universal Serial Bus Specification, Rev. 2.0 (Compaq, Hewlett-Packard, Intel, Lucent, Microsoft, NEC, Philips; 2000)
  • On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification (Hewlett-Packard Company, Intel Corporation, LSI Corporation, Microsoft Corporation, Renesas Electronics Corporation, ST-Ericsson; 2012)
  • "Universal Serial Bus Revision 3.1 Specification". USB.org. USB Implementers Forum. pp. 5–20

Operational characteristics

Development system requirements

From the NOVAsom Industries web site www.novasomindustries.com the user can download the NOVAsom SDK to ease the development process for all the NOVAsom Industries boards.
The NOVAsom M7 board is currently supported at the boot level, and there is the standard BSP support in form of device tree blob, or DTB.
The NOVAsom SDK is a virtual machine tool, running on a Fedora 20 core and based on VirtualBox.
The Virtual Machine is thus compatible with hosts based on Windows™, MacOS™ or Linux machines.
More detailed information about the installation process of the NOVAsom SDK can be found visiting the NOVAsom Industries web site at www.novasomindustries.com .
Normally, for a relatively relaxed development, an I5 host with 60 GBytes of free hard disk space and 8GBytes of RAM is enough.
For very heavy developments (as a complex 3D supported Qt file system or a Chromium X based application) “the bigger is better”, so more RAM you can dedicate to the Virtual Machine the faster the Virtual Machine will run.
A more than good situation is an I7 host with 16GB of RAM and 128GB of free disk space.
For connecting to the NOVAsom M7 console you need a serial port, and considering that on modern desktop the serial port is not present a USB to Serial adapter is probably the only choice you have.
Finally, you need a µSD written with a basic file system, and a way to physically write the µSD itself.
You can download a µSD image from the www.novasomindustries.com page in the NOVAsom M7 dedicated section, where you can find all the information about how to write a µSD from the NOVAsom M7 image you just downloaded using your preferred host system.

The NOVAsom M7 console

In order to use the serial console available on the NOVAsom M7 board you need a serial terminal.
GtkTerm is a good choice for Linux users, Teraterm is a nice choice for Windows™ users, it’s up to MacOS™ users to understand which kind of terminal application they need.
The NOVAsom M7 port is on pins 8 and 10 of J9 connector at 3.3V level. An external translator or an external USB to serial converter is required. NOVAsom Industries can provide a suitable adapter (see code 240718) to drive the pins adequately. A serial port with a bit rate of 115200 with no flow control and 1 stop bit is required to communicate with the NOVAsom M7 board.
The pins from where to connect the serial port are pin 8 of J9 (TXD from NOVAsom M7 board), pin 10 of J9 (RXD to NOVAsom M7 board) and pin 6 of J9 (the GND connection).
Just plug both the power supply and the serial port through the adapter and you will see the boot process of your new NOVAsom M7 board.

The first boot

The steps in order to boot your NOVAsom M7 board are:

  • Create the µSD with a standard file system as described in chapter 6.1 above
  • Insert the just written µSD in the J1 slot (note this is a push-push connector, avoid to extract the µSD forcing it or you can break the J1 µSD slot)
  • Connect the serial port to your NOVAsom M7 and a FHD capable monitor to the HDMI (J6 connector)
  • Insert an appropriate power source chord in the J11 connector and power it on.

After just some half a second you should see on your terminal application something similar to what you see in Figure 8 below, and this means you have your NOVAsom M7 powered up and running.

M7boot.png

Figure 8: The NOVAsom M7 first boot
Please note: the garbage in the very first lines are due to the output messages from the Rockchip binary distributed proprietary code during the DDR initialization, where the bit rate is set at 1.500.000 bit/sec. After this quick initial phase, the Novasom Industries boot loader is started and a more comfortable 115.200 bit/sec speed is programmed in the serial communication device.
A special note about the µSD slot: the µSD slot has not been designed to insert or remove the µSD card with power applied, so inserting or removing a µSD card with applied power may result in a permanent damage to the card or, worst, to the NOVAsom M7 board.
The card MUST be inserted without power applied.
The presence switch that equips the µSD slot of the NOVAsom M7 board signals to the processor that a card is in the slot, thus allowing the boot process to read the boot loader from the µSD slot.
If the card is not found when the power is applied the boot process will look in eMMC chip (if present) for a valid boot loader code, but remember that the presence of the qSPI chip depends on the NOVAsom M7 board configuration.

Connections to J9

J9 sports a lot of signals, and most of them are connected at the processor level without buffering or protection.
Although the processor is quite protected on over and under voltages, care should be taken in order to avoid to stress the processor outside the recommended operating conditions, or permanent damages will result on the processor itself.
It’s quite common to overtake a ringing digital signal that stresses the processor outside the recommended operating conditions, so if you are in doubt use dump series resistors in the order of 1 KΩ for input signals.
In the table 3 the signals are named as the standard DTB factory functions, and the colored functions are the functions provided by the standard DTB factory functions.
You can find all the information on how to change a pin function visiting the www.novasomindustries.com page in the NOVAsom M7 dedicated section, where you can find a lot of application notes and already developed tools and examples.

Connecting an external battery to the NOVAsom M7 board

The connector J12 is minded to connect a 3.7V external battery.
The external battery will be used on systems that need to be powered by an external battery.
On the other hand, the battery can be of a rechargeable type (Li-Ion or Lithium coin cell) and will be charged with 450 mA from the 5V supply.
Care should be taken to connect the correct battery (a 3.7V battery is requested, higher voltages will immediately destroy your NOVAsom M7 board) and connect the battery in the correct way, where the pin 1 of J12 is the positive and the pin 2 is the negative. A power inversion can permanently damage the battery or, worst, damage your NOVAsom M7 board.

Developing a NOVAsom M7 extension board

The RK3328 contains a limited number of pins, most of which have multiple signal options. These signal to pin and pin to signal options are selected by the input/output multiplexer called IOMUX.
The IOMUX is also used to configure other pin characteristics, such as voltage level, drive strength, and hysteresis.
Due to this, all the I/O pins on J9 behave as input at power up, and until the bootloader or the kernel are up and running, they are substantially configured as input.
All the inputs have an internal 100kΩ pull up to the VCC rail, whichever the VCC is.
Keeping this in mind, all the pins that are configured to be an output needs a pull down resistor in the range of 15kΩ in order to keep the particular signal at the low level, if needed.
This is true for all the I/O pins marked with the green or orange box in Table 3 for J9.
Conversely, all the pins marked with the yellow box in Table 3 doesn’t need external pull up or pull down, but require correct impedance matching depending of the line characteristics of the function the pin is associated to, so you should observe the basic recommendation in Table 6.

The following Table 6 indicates the recommendations of the special function pin.

Signal Group Recommendations
I2C buses: I2C2_SCL, I2C2_SDA No particular attention. The pull up resistor are on board, so they are not needed

Table 6: Groups recommendations
Here there are some basic rules for the correct interfacing to J9:

  • Don’t overdrive an input pin: all the pins have a 3.3V logic. Avoid to drive a normally powered 3.3V pin with values that exceeds those defined in Table 5: Recommended operating conditions.
  • Pay attention to overshoot or undershoot, and if present use a damp resistor in the range of 100 Ω to 1K Ω in series. The internal protection of the RK3328 will do the rest.
  • Understand the idle logic level (e.g. during reset) and use the appropriate pull up or pull down if needed, in the range of 15kΩ. The RK3328 processor has an internal pull up of 100 kΩ at power up on all I/O pins, so during the reset phase and for all the boot phases the I/O pins of the RK3328 will float high. For example, if you drive an external load activated with a low level, you will get a logic one on the I/O pin until the kernel has not defined this is an output pin (some 5 to 12 seconds after power is applied, depending on file system size), so you will have your load activated during all the boot phases.
  • Avoid short circuits between pins or between pins and power, even for limited time. Although the RK3328 is quite well protected, this rises power dissipation, may lead to pin breaks or worst and in any case is not a good practice.
  • Check thoroughly the impedance matching and trace lengths on the “special” signals listed in Table6.
  • Select the right output strength in the DTB file of your BSP and avoid using excessive strength for signals that don’t need this. Also, consider carefully the FAST output mode, as this leads to EMI problems and ring on not well-matched traces.
  • The I2C lines (I2C2_SCL, I2C2_SDA) has a 3.3KΩ pull ups on the NOVAsom M7 board to their own power. Avoid to place additional pull ups on the I2C lines, as this may lead to malfunctioning due to excessive load.

With these simple hints you will successfully design your own Extension board.

Board outline and mechanical dimensions

Detailed drawings and additional information can be found visiting the www.novasomindustries.com technical support page in the NOVAsom M7 dedicated section or contacting your sales/distributor contact.

Figure 9:The NOVAsom Dimensions

Troubleshooting

Here you can find a very basic list of things that can happen at the unexperienced user at the very first boot.
In case of hardware failure contact us at www.novasomindustries.com for additional support and follow carefully the instructions.

Power is applied but I can’t see anything on the terminal output.

• Check your µSD has been correctly inserted in J1 slot and power is applied.
• Check your µSD has been correctly written. The µSD has an initial FAT partition, so you can check if it’s correctly written on a Windows™, MacOS™ or Linux machine. If you can’t read the µSD this means it is broken or badly written, try to rewrite it or substitute it with a new one.
• Check if the green led D1 (power) is on. If it’s not on check your power supply voltage, current and wire orientation. Protections on the NOVAsom M7 board permit you to connect an inverted power, but not on overvoltage, so be careful. An undervoltage situation will not damage the NOVAsom M7 board, an overvoltage will damage your NOVAsom M7 board for sure.
• Check the connection with your serial port or the application you use as a terminal are correct. If still you don’t find anything wrong this should indicate an hardware failure.

I see the terminal but I have no connection with the network Check your cables and your connectivity, maybe you need to ask your network administrator. The NOVAsom M7 base image has a dhcp client active, so you need an accessible dhcp server to effectively use the network interface. If still you don’t find anything wrong this should indicate an hardware failure.
I can’t see any video on the LCD panel Check your log (on the terminal the command is dmesg | grep LCD). If the result doesn’t contain Detected LCD controller check your DTB file
I can’t see any video on the LVDS monitor • Check the voltage levels for the LCD power supply and the backlight power supply.

• Check your DTB has a correct description of the LCD panel and the timings.
• Check your DTB defines correctly the PWM output.
• If still you don’t find anything wrong and you are sure your panel is not broken this should indicate a hardware failure.

Contacts

Web page: www.novasomindustries.com

Document revisions, references and notes

Document revisions

N.M7-250518-HUM-V1.4 Errors and references fixes.
N.M7-250518-HUM-V1.3 Errors and references fixes. Add of dimensions and connectors position
N.M7-250518-HUM-V1.2 Detailed connectors and P/N
N.M7-250518-HUM-V1.1 Global Fixes on text and typo
N.M7-250518-HUM-V1.0 First release

External references

For the NOVAsom Industries products and NOVAsom M7 in detail: www.novasomindustries.com For the processors: Rockchip RK3328Applications Processor Reference Manual

Notes

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates.
It is your responsibility to ensure that your application meets with your specifications.
NOVAsom Industries MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. NOVAsom Industries disclaims all liability arising from this information and its use.
Use of NOVAsom Industries devices and software in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless NOVAsom Industries from any and all damages, claims, suits, or expenses resulting from such use.
No licenses are conveyed, implicitly or otherwise, under any NOVAsom Industries intellectual property rights.